Face Fastening Set 8 is used to create a rigid angled connection between two profiles whose grooved sides face each other. It can also be used to connect the end face of one profile to the grooved side of another profile. The two halves of the Face Fastening Set are located between the profiles being connected. A clamp lever extending all the way through may be used with Face Fastening Set 8 to facilitate adjustment.The angle between the profiles can be selected in 5° increments. The toothing ensures that the two halves fit together securely at the correct angle. The two halves must be pinned together if a moment of M > 10 Nm is applied to the Face Fastening Set. The permissible load is M Bmax. = 20 Nm.The anti-torsion blocks must be removed when attaching to panel elements. Position of the fixing bores in the panel elements and profiles. These fixing bores are predrilled in the fastener (⌀ 5.8 mm) .The anti-torsion blocks must be removed when attaching to panel elements. Position of the fixing bores in the panel elements and profiles. These fixing bores are predrilled in the fastener (⌀ 5.8 mm) .Two Line 8 Profiles are screw-connected using screw ISO 7380-M8x25, Washer DIN 125-8,4 and T-Slot Nut 8 St M8. An access hole must be made in one of the profiles to accommodate the Allen key.
